page top

Stainless Fittings

ORDER

DOCUMENTS

Connectors

Swivel Balustrade Connectors

Ball Type Swivel Balustrade Connector Ball Type Swivel Balustrade Connector with Stainless Wire
Product
Code
Description RRP Our
Price
SWC-06 RHT S316 M6 Ball Type Swivel Connector Right Hand Thread – Length 50mm (O.D. 8mm) x 36mm (M6 Thread). Swivel angle 30 to 40 degrees 7.50 5.00
SWC-06 LHT S316 M6 Ball Type Swivel Connector Left Hand Thread – Length 50mm (O.D. 8mm) x 36mm (M6 Thread). Swivel angle 30 to 40 degrees 7.50 5.00

Pin Type Swivel Balustrade Connector
Product
Code
Description RRP Our
Price
SWCP-06 RHT S316 M6 Pin Type Swivel Connector Right Hand Thread – Length 50mm (O.D. 8mm) x 36mm (M6 Thread). Swivel angle 0 to 90 degrees 7.50 6.00
SWCP-06 LHT S316 M6 Pin Type Swivel Connector Left Hand Thread – Length 50mm (O.D. 8mm) x 36mm (M6 Thread). Swivel angle 0 to 90 degrees 7.50 6.00

These patented marine grade polished stainless swivel connectors create a slimline stainless wire balustrade for railings and stairs where the wire is inclined at an angle of 30 to 40 degrees from the horizontal. Swivel balustrade connectorsare easy to install in tube (secured with blind rivet nuts), timber posts (secured with threaded timber inserts), metal plate (die tapped thread) and masonry posts (secured with drop-in anchors). The left-hand connector screws into a left-hand threaded fastener inserted perpendicularly to the anchor post and swivels to incline one end of the balustrade wire which has been swaged with a left-hand threaded stud. The right-hand connector screws into a right-hand threaded fastener inserted perpendicularly to the anchor post and swivels to incline the opposite end of the balustrade wire which has been swaged with a right-hand threaded stud. The stainless balustrade wire is tensioned by simultaneously rotating the left and right hand swaged threaded studs into the left and right hand swivel connectors.

Internal Threaded End Connector

Product
Code
Description RRP Our
Price
SEC-04 M6 Internal Threaded End Connector for 4mm wire; 70mm long 8.50 6.70

This turned and pressed, electro-polished AISI 316 stainless steel internal threaded end connector is suitable for joining 3.2mm and 4mm wire rope using 3 grub screws, whilst allowing an M6 bolt to be screwed into the opposite end.

Threaded End Connector

Product
Code
Description RRP Our
Price
TEC-04 M5 Threaded End Connector for 4mm wire; 80mm long 9.40 7.80

This turned and pressed, electro-polished AISI 316 stainless steel threaded end connector is suitable for joining 3.2mm and 4mm wire rope at one end using 3 grub screws, and screwing the other end into a tapped (M5) hole or attaching with an M5 nut. Eliminates the need to hydraulically swage the fitting to wire in certain applications.

Eye End Connector

Product
Code
Description RRP Our
Price
EEC-04 Eye End Connector for 4mm wire; 6.5mm eye: 52mm long 6.65 5.20

This turned and pressed, polished AISI 316 stainless steel eye end connector grips 3.2mm and 4mm wire rope at one end using 3 grub screws. Saves on the need to hydraulically swage the fitting to wire in certain applications.

Jaw End Connector

Product
Code
Description RRP Our
Price
JEC-04 Jaw End Connector for 4mm wire; 6.5mm jaw; 60mm long 11.45 8.90

This turned and pressed, electro-polished AISI 316 stainless steel jaw (fork) end connector grips 3.2mm and 4mm wire rope at one end using 3 grub screws. Saves on the need to hydraulically swage the fitting to wire in certain applications.

Threaded Rod Connector

Product
Code
Description RRP Our
Price
TRC-08 Threaded Rod Connector with M8 internal thread 1.90 1.50

This electro-polished AISI 316 stainless threaded rod connector is idea for joining threaded stainless steel rods together.

* Quoted prices exclude GST.