page top

July - August Special
Stainless DIY Balustrade Kit System K

Rigging Screw and Fork Terminal Slimline Balustrade System
Factory swaged for $11.40/run + GST

 

Save 15% on our System K, slimline hydraulically swaged S316 stainless steel balustrade kit for only $11.40+GST/run. (Normal price is $13.40/run). This is the most popular kit installed by our trade customers.

We will save you more money by supplying our premium quality, 3.2mm marine grade stainless balustrade wire rope (1x19 construction) for only $1.00/m+GST. Normally $1.20+GST/m.

This offer includes a free 'C' Spanner for tightening the rigging screws and a socket driver for driving the lag eye screws into pre-drilled timber posts. Retail price $10.20+GST

Each premium quality System K stainless wire balustrading set consists of:

  • One jaw-swage closed body rigging screw to tension the cable;
  • One fork swage terminal;
  • Two stainless lag eye screws (or pop rivets for metal posts) as the anchor points; and
  • Factory swaging of the fittings to the stainless wire rope.

You can also purchase the components separately ($8.40/run + GST) and swage the fittings yourself with one of our hand held hydraulic swaging tools.

System K can be used with timber or steel anchor posts. Ideal as a deck balustrade.

System K is quick and easy to install. All you need is a ruler, a drill, drill bits, wire rope cutter and a screwdriver. Just follow the steps in our "System K Stainless Wire Balustrading" instructional video or AAA Balustrading Guide.

To comply with Building Code requirements 3.2mm diameter balustrade wires should be spaced no more than 80mm apart provided the distance between the intermediate posts is no greater than 1200mm.

                   Only $11.40 (Factory swaged) + GST/set

 

Offer ends 31 August 2017.

To order, call Steve today on 024272 1077

Australia-wide delivery.