page top

Stainless Stair Rail Balustrading Made Easy

Stainless Steel Swivel Connector Photo 1 Stainless Steel Swivel Connector Photo 2

Stainless Balustrade Swivel Connector in Stainless Tube

Stainless Balustrade Swivel Connector in Timber Post

 

These marine grade, polished stainless swivel connectors are easy to install in hollow tube (secured with blind rivet nuts), timber posts (secured with threaded timber inserts), metal plate (die tapped thread) and masonry posts (secured with drop-in anchor bolts).

Save time and money. It only takes a moment to screw your stainless steel balustrade wires into the Swivel Connectors.

 

Benefits of using Stainless Steel Swivel Connectors:

  • Fasteners are more easily inserted perpendicular to the inward face of the anchor post. No more hassles trying to drill at awkward angles.
     
  • Allows for a wider range of anchor points to be used, many of which cannot be fitted at an inclined angle to an anchor post.
     
  • The balustrade wire is easily inclined and tensioned from both ends by simultaneously rotating the left and right hand swaged threaded studs into the left and right hand swivel connectors.
     
  • Can be used where wire balustrades change direction.
     
  • Self adjusts to accommodate most stairs or ramps.
     
  • The balustrade wire can easily be removed after it is fitted to the anchor points.

 

Stainless Steel Swivel Connector Photo 3

" Using this type of fitting made the job so easy ......so much better than any of the other methods I had planned for doing the wires for my staircase and everyone who has seen the finished staircase has commented on how great it looks ..........10 out of 10 on all counts ! " -  James R